If you have upgraded your extruder to a dual-drive BMG, added a BLTouch/3DTouch leveling sensor, or installed TMC2209 silent stepper drivers, you must compile your own firmware using Visual Studio Code (VS Code). Step 1: Set Up the Environment Download and install .
: Insert the card into the printer and power it on. The update should begin automatically and take less than a minute.
If you are looking to push the Sapphire Pro to its speed limits, two trees sapphire pro firmware link
Download the appropriate .bin firmware file from a trusted source. Get a MicroSD card, format it to . 2. Flash the Motherboard
Place the Robin_nano35.bin file and the assets folder onto the root of the card. If you have upgraded your extruder to a
Disclaimer: Firmware flashing involves risks. Always proceed with caution. The information here is for educational purposes based on community consensus.
Note: If you have modified your printer (e.g., swapped extruders or added a sensor), you will likely need to adjust the configuration files in Marlin before compiling. ❓ Troubleshooting Firmware Issues The update should begin automatically and take less
Users of the Two Trees Sapphire Pro often struggle with firmware updates. The process typically involves searching through obscure forum posts or Discord channels to find a valid .bin file, downloading it to an SD card, and hoping the screen recognizes it. Links are often broken or outdated.