Ensure the file is not inside a folder on the USB drive [5].

Once finished, the TV will restart automatically. Unplug the USB drive immediately. 📥 Where to Find the Software

Use a USB 2.0 flash drive with a capacity of 4GB, 8GB, or 16GB. Large USB 3.0 drives (32GB+) often fail to register during the bootloader phase.

A: Then TPSK518DPB802 may be misidentified. Check the hardware ID in Device Manager (Details tab → Hardware Ids) and search that value instead.

Just let me know your (found on the back of the panel) or the resolution of your screen.

Insert your prepared USB flash drive into the USB 1 slot (or any available USB port) on the side of the TV panel.

即使按照步骤操作，也可能遇到一些问题。以下是针对 TP.SK518D.PB802 主板的典型问题处理方法：

Copy the .bin file directly to the root of the USB drive (do not put it in a folder).

After restarting, confirm that the software is correctly installed:

Before downloading any file, check the back of your TV panel for a sticker detailing the (e.g., LSC320AN10). Flashing software configured for a 1920x1080 screen onto a 1366x768 screen will corrupt the display or permanently brick the board. Where to Look

Release the button when the indicator light starts flashing or an "Upgrading" progress bar appears on the screen. Factory Mode (Optional)

Plug the USB flash drive into the USB 1 slot of the TP.SK518D.PB802

Plug the USB drive into your PC, right-click the drive, select Format , change the File System to FAT32 , and click start. Step 2: How to Install the Firmware (USB Flashing Method)

：不同的 TP.SK518D.PB802 主板因应不同的屏幕和品牌要求，存在分辨率和存储容量的版本差异。 下载固件前，务必确认好自己电视的配置 ，包括：