Ch-899 Chouchin Radio Controlled Clock Instructions Jun 2026
If you live in a weak signal area, or if you want to use the clock immediately without waiting for the radio signal, you can set it manually. How to Set the Time Manually
Once the battery is in, the hands will spin quickly and stop at the position.
: This indicates a Daylight Saving Time (DST) zone mismatch. Check if your regional variant features a physical DST toggle switch on the back, or force a signal sync overnight to let the atomic data stream update the internal calendar.
To set up your , follow these standard steps for both automatic and manual synchronization. Automatic Setup ch-899 chouchin radio controlled clock instructions
The CH-899 let out a soft, inaudible sigh, and resumed ticking. It was now perfect. It was no longer Elias’s time; it was The Time .
Place the clock face-down on a soft cloth to protect the lens.
If successful, the hands will fast-forward to the correct local time. Manual Time Setting Instructions If you live in a weak signal area,
The display stopped blinking. The numbers froze. He was now the architect of time. He pressed + and - , adjusting the hours and minutes based on his own wristwatch—a cheap quartz piece that had never spoken to a satellite in its life.
: WWVB (North America), DCF77 (Europe), or JJY (Japan) depending on regional variant. Power Source : 1.5V AA Alkaline battery (1 required).
Then, a soft click.
: If the clock shows the wrong time, ensure the Time Zone and DST switches were set before inserting the battery.
Hold the M.SET button down continuously until you get close to your target time.
The CH-899 receives a low-frequency radio signal once every 2 to 24 hours, most often during the night when radio interference is minimal. It will automatically adjust its time based on this broadcast. Once placed correctly, it will maintain atomic clock accuracy indefinitely, even adjusting for Daylight Saving Time automatically. Check if your regional variant features a physical
Allow the clock to remain in this position. The movement will begin searching for the radio signal to set the correct time automatically. 3. Automatic Time Setting Procedure