Maintenance Box Resetter For Epson L6170 〈2025〉

You drill a hole into the maintenance box, attach a silicone tube, and drain waste ink into an external bottle. This is a common modification for large-format printers. On the L6170, it – you still need a resetter to clear the error. However, once reset, you’ll never need to buy another box again.

In the world of printer maintenance, the Epson L6170 maintenance box resetter is a small tool that solves a frustrating problem: the "Service Required" error that occurs when your printer's T04D1 maintenance box (waste ink tank) reaches its software-defined limit.

Do you already or are you looking to buy one ?

Instead, the L6170 is part of Epson’s newer lineup. It uses a maintenance box (C9342 / T6712) that has a chip that must be: maintenance box resetter for epson l6170

Alternatively, thoroughly wash the original pads in warm water, let them dry completely for 24 hours, and reinsert them. Step 4: Reset the Chip

Run the utility. You will need to purchase a reset key from the developer to activate the reset function for your specific printer model.

Turn off the printer and unplug it from the power source for safety. You drill a hole into the maintenance box,

The chip may have been corrupted during the reset process, or it was reinserted crookedly. Remove the box, clean the chip contacts gently with a bit of rubbing alcohol on a cotton swab, and try resetting it one more time.

For heavy-volume printers, some users drill a small hole in the maintenance box, route a silicone tube from the printer's internal waste pump, and drain the ink into an external bottle placed next to the printer. Troubleshooting Common Resetter Issues

If you reset the chip without addressing the physical waste ink, the box will eventually overflow, potentially damaging your printer or staining your desk. How to Reset Epson L6170 with Resetter However, once reset, you’ll never need to buy

Press and hold until the resetter's LED light changes from red to green.

Don’t let Epson’s planned counter lock you out. Buy a resetter, replace your waste ink box, and keep printing.