If you need help resolving a specific error or configuration issue, let me know:
Uninstall the device completely from the Device Manager, check the box to "Delete the driver software for this device," reboot your machine, and rerun the installation package as an administrator. Data is corrupted or showing as weird symbols
Most USB-to-serial chipsets are natively supported via the usbserial kernel module. No manual installation is typically required. Step-by-Step Installation Instructions
: Often uses the Silicon Labs CP210x bridge controller (VID 10C4, PID EA60). cipherlab 308 usb-to-rs232 interface converter driver
Once the COM port appears (e.g., COM5 ):
A: Yes. Always download the correct architecture. Modern Windows (10/11) is almost always 64-bit. The official Prolific driver includes both.
: Click on the link to download the driver. Ensure that the version of the driver matches the operating system version installed on your computer. If you need help resolving a specific error
Note the specific assigned (e.g., COM4). This value must be matched identically within your POS or data-harvesting software configurations. Advanced Troubleshooting & Configuration
Insert the CipherLab 308 converter directly into a native USB port on the motherboard (avoid unpowered USB hubs).
: The hardware typically utilizes a Silicon Labs CP210x USB-to-UART bridge. Modern Windows (10/11) is almost always 64-bit
If the device appears in Device Manager with a yellow exclamation point accompanied by "Error Code 10" or "Error Code 52":
After the driver installation is complete, connect your CipherLab scanner or terminal to the computer using the 308 converter cable. The system will automatically recognize the new hardware. You should see a notification that it has found a "CIPHERLAB 308 USB-to-RS-232 Interface Converter" and a "CP210x USB Composite Device". A few seconds later, the system will confirm the device is ready for use.
: Once on the CipherLab website, locate the support or downloads section. Search for the "CipherLab 308 USB-to-RS232 interface converter" and select the appropriate operating system (Windows, macOS, Linux, etc.).
Silence. The scanner blinked once, then gave a sad, low beep. Error.
The is a critical piece of software designed to bridge the gap between modern computing hardware and legacy serial-based data capture devices. By facilitating communication between a computer's USB port and a serial-based CipherLab barcode scanner or mobile computer, this driver enables seamless data transmission in industries ranging from retail to manufacturing. Purpose and Functionality