: Improvements were made to the Personal Video Recorder (PVR) features, which utilized the device's USB port to allow users to record digital broadcasts directly to external storage.

Because the upgrade was reverse-engineered, the HDCP handshake was deliberately loosened. This meant users could connect the Iclass 9898 XS to older HDMI switches, capture cards, and projectors that would otherwise reject the signal. For digital archivists, this was the killer feature.

If you own an Iclass 9898 XS PVR that is still running factory firmware from 2012, the following procedure will bring it to the "9898 XS HDMI Upgrade 2013" spec. This process will erase all settings and recorded content.

After completion, the device will reboot. Remove the USB drive immediately to avoid a loop. The first boot into the new 2013 HDMI firmware will take up to 3 minutes—do not panic.

: Fixes common "update error" messages that users frequently reported in earlier versions. HDMI Compatibility

onto the root directory of your FAT32‑formatted USB stick. ⚠️ Do not rename the file. Do not put it in a folder.

If your box is still working and you want to refresh the software:

This is the preferred method for most users as it only requires a standard USB flash drive. Preparation: Download the firmware file (usually ending in ) and save it to the root of a FAT32-formatted USB drive.

In 2013, the received a significant firmware upgrade that focused on enhancing its digital output capabilities. This update was particularly notable for stabilizing HDMI (High-Definition Multimedia Interface) connectivity , allowing for more reliable uncompressed digital audio and video links.

When talking about an “upgrade” for this receiver, three main categories exist:

Plug the USB drive into the front or rear port of your Iclass receiver. Using your remote, navigate to: USB Transfer Software Upgrade depending on your current UI). 3. Execute the Flash