The USB dongle must remain plugged into the PC at all times while WinGP is running. 2. Software License (Node-Locked Key Code)
Enter on the WinGP runtime (typically by touching opposite corners of the screen or via the system menu). Navigate to [Display Unit] > [Extended Settings] .
Once deactivated, you can use the exact same key code and serial number to activate WinGP on your new computer. proface wingp key code
Industrial environments undergo frequent hardware refreshes. If your IPC fails or requires an upgrade, you must handle your WinGP key code carefully.
For newer versions (Ver. 5.0 or later), you may need to use the HMI License Manager The USB dongle must remain plugged into the
The key code entry process can be performed in two ways:
Run the Pro-face installer and ensure the WinGP component is checked. Navigate to [Display Unit] > [Extended Settings]
The process for activation and installation differs depending on which license you have purchased.
However, a crucial step in deploying this solution is activating the software, which requires a .
| Scenario | Description | |----------|-------------| | Initial Installation | Key code entered during setup to activate trial or permanent license. | | Runtime Activation | WinGP runtime on a panel PC prompts for key code before running projects. | | Transfer from Proface HMI | Some workflows require key code when migrating a project to a Windows PC. | | Dongle Replacement | If a USB license dongle fails, a new key code may be issued by Proface support. |