for at least 60 seconds to allow the internal capacitors to discharge. Plug it back in and turn it on. 2. Network Settings Reset
: Keep holding until the Wi-Fi and Wi-Fi Direct lights start flashing alternately.
This is the first step for general glitches like frozen lights or slow printing. the printer using the Power button.
Your waste ink pad counter is now reset to 0%, and the flashing red errors should be gone. Method 4: Alternative Reset Software (WIC Reset Utility)
Download a compatible or a trusted third-party utility like WIC Reset Utility .
This requires the official (also known as the Resetter Tool).
This article provides a comprehensive guide on how to reset the Epson EcoTank L3252 printer Go to product viewer dialog for this item.
Pull the power cable out from the back of the printer and unplug it from the wall outlet.
Resetting the software counter tells the printer that the ink pads are brand new, but it .
What (Windows or Mac) is your computer running?
Printer Settings > Network > Reset Network Settings .
Arthur groaned. He knew what this was. He had seen the forums. The "Ink Pad Counter" was full. Basically, his printer had reached an internal limit where it believed the sponge pads inside, which soak up waste ink during cleaning cycles, were saturated. It was a safety mechanism, but to Arthur, it felt like a built-in obsolescence timer.
Dust can clog the nozzle heads, forcing you to run cleanings that fill up the waste ink counter prematurely.
: Turn the printer off and then back on when prompted by the software. Method 2: Using WIC Reset Utility
A: Epson does not officially provide this tool to consumers. It is intended for service centers. You can find it on technician forums (like 2manuals.com or similar sites). Always use a trusted antivirus when downloading these files.