: The update increased the "open card yield" (successful initialization) for MLC and B16/B17 flash memory. Practical Usage Tips
Temporarily turn off aggressive real-time antivirus blocks, as low-level USB flash programming routines can trigger false flags.
This "Mass Production Tool" is specialized firmware-flashing software designed for FirstChip controllers. While it looks technical, it is one of the most effective ways to revive corrupted USB storage at home. Supported Controllers
: Because these tools interact deeply with hardware, antivirus software often flags them as threats. Experts suggest scanning files manually and disabling real-time protection during the flash process. --- Firstchip Fc1178 Fc1179 Mptools V1.0.5.2 -
This document is for educational and informational purposes only. Ensure you have the correct hardware and firmware version before use. MPTOOLS V1.0.5.2 is recommended for FC1178/FC1179 units manufactured after Q1 2024. For older hardware, check compatibility on the Firstchip website.
Some versions of the utility require a password in the .ini configuration file. If a password is required, try leaving it blank or searching for "FirstChip_MpTools_20220601 password". Summary Table of Features Description Model Firstchip FC1178/FC1179 MPTools Version v1.0.5.2 (2022-06-01) Compatibility FC1178, FC1178E, FC1179S Main Functions Reflash, Repair, Capacity Management Best For Fixing Fake Capacity Drives
The FC1178 and FC1179 are widely used USB 3.0 controller chips that feature dual-core ARM Cortex-M processors. They are designed to work with modern TLC (Triple-Level Cell) and QLC (Quad-Level Cell) NAND flash memory and include advanced features like hardware AES-256 encryption engines, independent SRAM cache units, and configurable DMA channels. Both chips are capable of wear-leveling (distributing writes to prolong NAND life), error correction (ECC), and complex logical-to-physical address mapping (FTL). : The update increased the "open card yield"
In the settings menu, the critical option is "Scan Level" under the "Scan Setting" section:
To successfully repair a drive using this tool, follow these steps according to community experts at Elektroda and USBDev :
This typically indicates that the NAND memory has exceeded its write cycle limits or suffered a physical hardware failure. If lowering the scanning speed or toggling more aggressive ECC settings fails to bypass this error, the memory chip is likely degraded beyond recovery. While it looks technical, it is one of
The software natively provides technical configurations for: FC1178 3D, FC1178 BC FC1179 Series: FC1179, FC1179S, FC1179AB FC2279 Series: FC2279S, FC2279AA When to Use MpTools V1.0.5.2
The specific versions supported by the tool are wide-ranging: