Firmware updates often reset the Z-offset coordinates and leveling mesh arrays. Run the automatic bed leveling routine and manual auxiliary leveling sequence before running a test print. 4. Troubleshooting Common Installation Failures Potential Cause Actionable Solution Printer ignores USB file Wrong USB format or partition style.
After the update, it is highly recommended to perform and Input Shaping to ensure print quality. Advanced Recovery (SOC/UI Update)
Below is the definitive guide to performing both online and offline firmware updates for your QIDI X-Plus 3 Important: Before You Start NEVER update via Fluidd/Mainline Klipper:
: Ensure you have 3 files in the root directory: update.qd , ui.bin , and logo.bin (names may vary slightly by version). qidi xplus firmware install
: Plug the drive into the printer and tap the About icon. You should see "Updating in Progress" in the lower left corner.
Turn off the printer, remove the USB drive, and delete the firmware files from the drive on your PC. Keeping them on the drive will cause the printer to re-flash every time it boots. Method B: For the QIDI X-Plus 3 (Klipper / Linux System)
Turn off the machine, remove the USB drive, and delete the installation files from the drive to prevent a repetitive boot-loop update. For the QIDI X-Plus 3 (Klipper/EMMC Framework): Firmware updates often reset the Z-offset coordinates and
For users seeking to extend the functionality of their QIDI printer beyond the official software, the community offers several open-source conversion paths. These typically involve migrating the printer to a firmware base, which provides more control and access to newer features. However, be aware that these are advanced projects with specific requirements and potential trade-offs.
The system will automatically detect the update files on bootup, flash the host/MCU, and reboot into the new Klipper screen interface.
Navigate to the official QIDI Tech support page ( www.qiditech.com/Support ). : Plug the drive into the printer and tap the About icon
Insert it into the slot (sometimes located on the back of the screen itself for
Here’s a solid, step-by-step blog post tailored for QIDI X-Plus owners. It focuses on safety, common pitfalls, and the official upgrade path.
Keeping your 3D printer's firmware up to date provides several critical advantages:
Extract the file on your computer. You should see a folder named
The mainboard will automatically detect the files, beep, and display a progress bar. Do not turn off the machine during this process.