Version 1.050 is an older software tool built for Windows XP, Windows 7, and Windows 8. If you are running Windows 10 or Windows 11, you must run the application in Compatibility Mode for Windows 7 to ensure stable communication.
This tool is not officially distributed by Canon. Instead, it appears to have originated from technical documentation or repair centers and is circulated on various third-party websites, forums, and support communities. While created by Canon for service purposes, its unofficial distribution means it is not supported or endorsed by the company.
Press the (or 4 times depending on your model) consecutively. Canon service mode tool version 1.050
Using the Canon Service Mode Tool Version 1.050 is relatively straightforward. Here are the steps to follow:
Printers have two operational states:
Using service software carries inherent risks. Missteps can brick the printer's mainboard, rendering it useless. Software Freezing or "Not Responding"
Verify your printer model against the compatibility list. You may need a newer version of the service tool (such as v3400 or v5103). Error Code 005 Meaning: The software cannot find the printer. Version 1
The tool includes several diagnostic and maintenance features that operate at the printer's firmware level:
Triggers advanced calibration cycles that are unavailable through the standard Windows print driver. Instead, it appears to have originated from technical
Before running the program, you must put your printer into Service Mode, or the tool will not communicate with it. Turn the printer (but leave it plugged in). Hold down the Resume (Reset) button. While holding Resume, press and hold the Power button. Release the Resume button, then press it twice.
Sometimes, after refilling a cartridge or resetting a chip, the printer refuses to recognize it. Version 1.050 can sometimes force a reinitialization of the cartridge detection system, bypassing the lockout.