Canon G3400 Reset !!hot!! Jun 2026

Wait a few moments. The green light should now be glowing solid. This means your is officially in Service Mode! Step 2: Reset the Waste Ink Counter

There is a significant and widely reported risk associated with attempting a waste ink counter reset on Canon G-series printers.

Disclaimer: Modifying your printer using third-party service tools may void your warranty. This guide is for informational purposes. Always wear gloves when dealing with waste ink.

If your printer is not throwing a 5B00 error but is experiencing connectivity issues, a simple factory reset will resolve it. Step-by-Step Instructions Turn on the printer.

Keep holding the button, then release the Stop/Reset button. canon g3400 reset

This is the standard procedure to resolve hardware-level lockouts, such as the 5B00 error (Support Code for a full ink absorber).

The Power light will flash for a few moments while the printer restores its original factory software. Once the Power light remains steady, the factory reset is complete.

Locate the section, set the value to 0% , and click Set .

If you have changed your router, updated your Wi-Fi password, or the G3400 simply refuses to connect to your network, you need to reset the network initialization settings to factory defaults. Turn the printer . Wait a few moments

Performing a manual or software reset typically voids any remaining official warranty. Official Stance: Canon officially recommends that users contact a service center

Resetting the Canon G3400 can be a simple and effective way to resolve common issues with the printer. By following the steps outlined in this guide, you can perform a soft reset or a hard reset, depending on the issue you are experiencing. Remember to always save important documents and settings before performing a reset, and to reconfigure your printer settings after the reset is complete.

While still holding the Power button, press the in succession. Release the Power button .

I can provide the exact software links or targeted advice for your specific operating system. Share public link Step 2: Reset the Waste Ink Counter There

While still holding the Power button, release the Stop button.

Before performing a reset, you must identify why your printer is locked. The Canon G3400 communicates errors through alternating flashes between the green light and the orange Alarm light.

: To perform a general initialization of machine settings.