Xerox Fault Code 043-343 «8K - HD»

Wait at least 60 seconds to allow the internal capacitors to drain completely.

Example concise troubleshooting sequence (what a technician might do)

Because the fuser is responsible for melting toner onto paper using high heat and pressure, any deviation in its performance triggers an immediate safety shutdown. Xerox Fault Code 043-343

Carefully remove and re-insert the YMC drum cartridges to ensure they are fully seated and communicating correctly with the sensors. 3. Inspect for Obstructions

Follow these steps in sequence to isolate and resolve the issue before calling a service technician. 1. Perform a Full Power Cycle Wait at least 60 seconds to allow the

2. Isolating a Mechanical/Solenoid Issue (If Link Bar Failed to Move)

The motor itself may have a burned-out coil, worn brushes, or an internal electrical short. Perform a Full Power Cycle 2

How to Fix 043-343 Error Code for Xerox C7020 C7025 C7030 C7000?

If all mechanical checks and wiring inspections are negative (no breaks, shorts, or obstructions), the fault is likely a failing electronic component. Xerox technical documentation provides a clear order for replacement:

Enter service mode code dC330 042-011 to trigger the operating link bar.