The ammeter needle will move to show the current being drawn. As the battery fills, the needle will gradually drop toward zero.
Here are the golden rules of safe battery charging:
Includes short circuit, reverse polarity, and thermal overload protection, housed in a flame-retardant case.
When you first turn the charger on, the needle will jump to a higher number (typically between 3 to 4 Amps, depending on how depleted the battery is). This indicates the battery is actively drawing a high current. selmarturbo4batterychargerinstructions
: For non-sealed batteries, remove cell caps and top up with distilled water if the liquid is low before charging. Fuse Replacement
Once the needle reaches a constant low level (near zero), the battery is fully charged.
: Batteries release flammable gases during charging. Always operate in a well-ventilated area. The ammeter needle will move to show the current being drawn
Connect the black negative (-) clamp directly to the negative (-) battery terminal.
: Always charge in a well-ventilated area, as lead-acid batteries can release explosive gases during the charging process.
Your Selmar Turbo 4 is most likely designed for common , including: When you first turn the charger on, the
Following the order of operations prevents sparks near the battery.
Even with correct , you may encounter issues.
Ensure the charger is unplugged from the wall. Check that the battery terminals are clean and free of corrosion. Connection: Connect the Red (Positive +) clip to the positive terminal of the battery first. Connect the Black (Negative -)