Launch your chosen MTK Bypass Tool. Click on or Disable Auth . Connect your phone (turned off) to the PC while holding the Volume buttons. The tool should log a successful authentication bypass, freezing the device connection in the necessary "bootrom" state. 3. Set Up SP Flash Tool Open the SP Flash Tool.
Boot your phone into Fastboot Mode and connect it to your PC. how to unbrick poco m5s
Boot your phone into Mi Recovery (Hold Volume Up + Power). Select Wipe Data > Wipe All Data . Confirm the action and reboot the system. To help narrow down your troubleshooting steps, tell me: Launch your chosen MTK Bypass Tool
Look at the bottom of the Mi Flash Tool interface. You will see three options: The tool should log a successful authentication bypass,
EDL mode is a last-resort, low-level protocol used to flash firmware when the phone's main software is completely corrupted. It is often the only way to fix a hard brick.
Press and hold the for roughly 10 to 15 seconds until the device vibrates and displays the Poco logo.
Ensure the ROM format is (Fastboot ROM), not a .zip (Recovery ROM).