You can find drivers and configuration tools for the R80180i from the following regional suppliers and tech repositories:
The printer follows the industry-standard , ensuring broad compatibility with various POS software.
Select to bypass Windows User Account Control constraints.
| Parameter | Value | |-----------|-------| | | Direct thermal line printing | | Print speed | 180 mm/s (some models: up to 250 mm/s) | | Resolution | 203 dpi (8 dots/mm) | | Print width | 72 mm (576 dots/line) or 512 dots/line | | Paper width | 79.5 ± 0.5 mm | | Paper thickness | 0.06–0.08 mm | | Roll outer diameter | ≤ 83 mm | | Interfaces | USB + Serial + Ethernet; optional Bluetooth | | Command set | ESC/POS (extensively compatible) | | Cutter | Fully automatic | | Cash drawer port | RJ‑11 (6‑wire), 12 V or 24 V | | Power supply | 110 V / 220 V, 50–60 Hz | | Operating environment | 5 – 45 °C, 10 – 80 % RH | | Dimensions (approx.) | 158 (W) × 250 (L) × 138 (H) mm | | Weight | ~2.6 kg |
: Legacy driver residue or conflicting receipt devices competing for the exact same port string. Correction Steps : Fully disconnect the printer cable. smart pos r80180i driver exclusive
Follow these sequential steps to safely deploy the driver on your system. Note: Admin privileges are required. Step 1: Secure the Official Driver Package
Many third-party websites offer “universal” drivers that can brick your printer’s firmware or cause security risks. Always download from official or verified sources.
driver, from technical specifications to a step-by-step installation walkthrough. Key Specifications of the Smart POS R80180i
You're looking for information on the Smart POS R80180I driver. Here are some helpful pieces of information: You can find drivers and configuration tools for
The Definitive Guide to the Smart POS R80180i Driver Exclusive Installation
Choose your deployment language and progress through the initial confirmation prompts. Phase 3: Port and Interface Selection
Select the communication port. If using USB, check .
During setup, you may need to manually select the port. Typically, this will be or the highest available USB port number. Generic Drivers: Correction Steps : Fully disconnect the printer cable
The original BTP‑R180 V1.12 driver explicitly lists support for Windows 8 and below, and Windows Server 2008 and below. For Windows 10 or 11, you may need to contact the manufacturer for an updated driver or use compatibility mode.
Official driver support can be difficult to find online, with many users relying on shared community links or local vendor support.
Keep a copy of the driver on a USB drive stored inside your POS terminal. This saves hours if you ever need to reinstall without internet access.
When prompted by the installation wizard, select the primary hardware interface: or Serial (COM) .