Autocraft Battery Charger Ac-60cr Manual -
Following these steps ensures safe and effective charging with your AC-60CR:
The battery is severely discharged or has a shorted cell.
The front face of the Autocraft AC-60CR features an analog ammeter gauge, voltage selectors, and a timer switch. Understanding these controls ensures you do not overcharge your battery. 1. Voltage Selector Switch
: Identify a heavy, unpainted metal part of the vehicle frame or engine block away from the battery and fuel lines. Attach the Negative (Black) clamp to this grounding point. Do not attach the negative clamp directly to the negative battery terminal while it is installed in a vehicle.
As the battery charges, the needle will slowly drop toward zero. autocraft battery charger ac-60cr manual
If the engine fails to start, turn the ignition key back to off, flip the charger back to the setting, and let it sit for 3 minutes . This packs surface charge back into the battery and cools down the charger.
Move the function switch to the 250A Engine Start position.
If you can tell me or if the charger is making a humming noise , I can help you diagnose the specific problem with your battery charger.
Working around lead-acid vehicle batteries poses an due to the venting of flammable hydrogen gas during the charging process. Following these steps ensures safe and effective charging
Stop charging immediately if the battery becomes hot to the touch or if you notice heavy bubbling/gassing. 5. Using the Engine Start Feature Connect the clamps following the standard connection steps.
A low, slow charge rate ideal for maintaining small motorcycle or lawnmower batteries, or safely topping off a car battery overnight.
Let me know how you'd like to . 12V ANALOG BATTERY CHARGER WITH ENGINE STARTER
Keep your Autocraft AC-60CR running efficiently for years with basic upkeep: Do not attach the negative clamp directly to
This guide is for informational purposes and is based on a synthesis of available manuals for Autocraft products and standard industry safety practices. Always refer to your specific product's labeling and any provided documentation.
clamp to the vehicle chassis or engine block, away from the battery.
Plug in the AC cord and select the position on the control panel. Crank the engine for no more than 3 to 5 seconds .