When you download an "Adjustment Program" from third-party websites, you are getting a cracked or shared version of Epson’s service tool.
When your Epson XP-313 refuses to print and displays a message indicating that parts inside the printer are nearing the end of their service life, it means the absorbent ink pads at the bottom of the machine are theoretically full. The printer stops to prevent ink from leaking out of the machine.
Open the small plastic compartment at the back/bottom of the printer, remove the saturated felt pads, and replace them with a fresh set. Adjustment Program Epson Xp 313
Ensure you are using the correct version of the adjustment program specifically for the XP-313.
Click the button. The software will communicate with the printer and display your current point count and saturation percentage. When you download an "Adjustment Program" from third-party
Подробнее о сбросе ошибки E-10, W-13 на принтере Epson XP-313, XP-413:
Once the counter hits 100%, the printer triggers a hardware lockout. Open the small plastic compartment at the back/bottom
Performing a software reset is only half the solution. The waste ink pad is a physical sponge that absorbs excess ink. Resetting the counter tells the printer the pad is empty, but if the physical pad is already saturated, you will eventually face ink leaks inside your printer, which can cause serious damage.