Request a custom version (ARM or MIPS) of USB Network Gate to integrate our technology in your product. Our developers will compile a customized package for your project.
Request custom version
Latest FTDI USB-to-Serial drivers installed on your PC. Step-by-Step Installation Guide
If using the OPC-478UC USB cable, you must download and install the official Icom USB cloning cable driver (usually a Prolific or FTDI driver) before plugging it into your PC.
Open the Windows Device Manager , expand "Ports (COM & LPT)", and note the number assigned to your Icom cable (e.g., COM3).
Open the CS-F2000 software, navigate to from the top menu, and select the matching COM port. How to Program Your Icom IC-F2000 Radio
Downloading the software is only half the battle. You will also need:
Using pirated radio software violates intellectual property laws. Required Hardware for Programming
If using the USB cable, you must install the specific Icom USB sealing drivers for your PC to recognize the hardware.
Plug the 3.5mm jack of the programming cable into the speaker/microphone jack on the side of the radio. Plug the USB end into your computer. Turn the radio on and turn the volume knob to roughly 50%. Step 2: Configure the COM Port Launch the application. Click on COM Port in the top menu bar.
Input your TX/RX frequencies, alphanumeric channel names, and squelch tones.
Input RX/TX frequencies and Narrow/Wide band settings.
Follow the on-screen prompts, accept the terms of use, and enter your software serial key if prompted by the dealer. Launch the application once installation finishes. Step 3: Identify the COM Port
The CS-F2000 software is built natively for Windows environments (Windows 10 and 11 are generally supported in the latest revisions). Step-by-Step Installation and Setup
Turn off your radio. Plug the 3.5mm jack of the programming cable firmly into the radio's speaker/microphone jack. Turn the radio on, then click the icon (Radio to PC) in the software. This backs up your current radio configuration. Step 4: Edit Frequencies and Settings You can now modify individual channels: Frequency: Input your licensed TX and RX frequencies.
The software enables the configuration of DTMF tones and autodial settings. Downloading and Accessing the Software
Configuring 2-Tone, 5-Tone, and MDC 1200 signaling.
Open CS-F2000, go to the COM Port settings , and select the matching port number. Basic Programming Workflow
Latest FTDI USB-to-Serial drivers installed on your PC. Step-by-Step Installation Guide
If using the OPC-478UC USB cable, you must download and install the official Icom USB cloning cable driver (usually a Prolific or FTDI driver) before plugging it into your PC.
Open the Windows Device Manager , expand "Ports (COM & LPT)", and note the number assigned to your Icom cable (e.g., COM3).
Open the CS-F2000 software, navigate to from the top menu, and select the matching COM port. How to Program Your Icom IC-F2000 Radio
Downloading the software is only half the battle. You will also need:
Using pirated radio software violates intellectual property laws. Required Hardware for Programming
If using the USB cable, you must install the specific Icom USB sealing drivers for your PC to recognize the hardware.
Plug the 3.5mm jack of the programming cable into the speaker/microphone jack on the side of the radio. Plug the USB end into your computer. Turn the radio on and turn the volume knob to roughly 50%. Step 2: Configure the COM Port Launch the application. Click on COM Port in the top menu bar.
Input your TX/RX frequencies, alphanumeric channel names, and squelch tones.
Input RX/TX frequencies and Narrow/Wide band settings.
Follow the on-screen prompts, accept the terms of use, and enter your software serial key if prompted by the dealer. Launch the application once installation finishes. Step 3: Identify the COM Port
The CS-F2000 software is built natively for Windows environments (Windows 10 and 11 are generally supported in the latest revisions). Step-by-Step Installation and Setup
Turn off your radio. Plug the 3.5mm jack of the programming cable firmly into the radio's speaker/microphone jack. Turn the radio on, then click the icon (Radio to PC) in the software. This backs up your current radio configuration. Step 4: Edit Frequencies and Settings You can now modify individual channels: Frequency: Input your licensed TX and RX frequencies.
The software enables the configuration of DTMF tones and autodial settings. Downloading and Accessing the Software
Configuring 2-Tone, 5-Tone, and MDC 1200 signaling.
Open CS-F2000, go to the COM Port settings , and select the matching port number. Basic Programming Workflow