Hold down the ALARM button. The display will show AL (alarm) and the hour will start flashing.
Here are the specifications for the DT6507 LED mirror clock:
To set the time and date on your DT6507 LED Mirror Clock, follow these steps:
Disclaimer: Some DT-6507 models may have slight variations in button labeling (e.g., SET vs. MODE). If these instructions do not match, please refer to the specific seller's documentation.
: Some reviewers on Amazon.de mentioned the mirror surface can be prone to scratches if the protective film is removed carelessly. dt6507 led mirror clock instructions
In normal time mode, press and hold the button. The hour will flash. Use UP/DOWN to adjust.
Never miss an appointment by configuring your wake-up preferences properly. 1. Set the Alarm Time
Set the start hour and minute using and MODE , then repeat the process for the end time. Stopping the Screen from Turning Off
| Problem | Solution | | :--- | :--- | | | Tap the Power icon. If bright in daytime but off at night, check for a built-in Light Sensor (cover it with a finger). | | Time resets after unplugging | The internal battery is dead. Leave the mirror plugged in for 24 hours to recharge it. | | Temperature shows "---" or wrong | The external sensor is unplugged or damaged. Check the tiny jack port on the back of the mirror. | | Buttons are unresponsive | Wipe the glass dry. Moisture causes false touches. Unplug for 30 seconds to reset. | | Bluetooth won't pair | Press and hold the Play button until you hear "Pairing." Forget the device on your phone and re-scan. | Hold down the ALARM button
When the alarm goes off, press to turn it off completely until the next day. Pressing SNZ/LIGHT will trigger the snooze timer, causing it to ring again after your designated snooze interval. My time resets whenever I unplug the clock. Why?
Press again to confirm. The Hour digits will start flashing.
The month digits will flash. Use or DOWN to adjust. Press MODE to confirm.
To program your clock, ensure it is plugged in and the screen is active. How to Set the Time In normal time mode, press and hold the button
Press and hold the button until the Year digits start flashing. Use UP or DOWN to change the year. Tap MODE ; the Month digit will flash. Use UP or DOWN to choose the correct month. Tap MODE ; the Day digit will flash. Use UP or DOWN to select the current date. Tap MODE to confirm and lock in your settings. 3. Setting and Configuring the Alarm
To activate or deactivate the alarm, press the button once while on the main time display.
Search YouTube for "DT6507 mirror clock setup" or check your seller's listing for a video tutorial.
: Increases values during setup or toggles the temperature unit (°C/°F).
If your mirror has no visible icons, try touching the bottom right corner in sequence—many generic DT6507 units hide controls there.