If you’ve cleared the jam, let the unit cool, and pressed the reset button—only for it to pop out again the next time you use it—you may be dealing with a deeper issue:
) into the hex socket at the very bottom center of the unit. Rotate it back and forth until the internal plate spins freely. Press the Reset Button:
Use the silver hex key that came with the unit (or a 1/4 inch Allen wrench).
Turn on a steady, medium stream of cold water into the sink. how to fix a insinkerator garbage disposal hot
Insert a (InSinkErator Jam-Buster tool).
With the jam cleared and the circuit reset, you can safely test the functionality of your unit.
Follow this step-by-step troubleshooting guide to cool down your disposal and get it running smoothly again. 1. Kill the Power Immediately Before you do anything else, you must ensure your safety. If you’ve cleared the jam, let the unit
InSinkErator units utilize a red reset button to protect the motor from electrical failure during a jam.
. Overheating is often caused by a jam or overuse, which trips the unit's internal thermal overload protector to prevent permanent damage. Step-by-Step Fix for an Overheated Unit Turn Off the Power:
Restore power and test briefly
Switch off the wall switch and, for extra safety, unplug the unit or flip the circuit breaker in your electrical panel.
Never put your hands or tools inside the disposal while it is connected to power. controlling the unit.
If the motor was very hot, wait 10-15 minutes before trying to turn it on again. 4. Check for Electrical Issues Turn on a steady, medium stream of cold water into the sink
Flip the disposal switch on and off a few times to ensure there is absolutely no power running to the unit.